CONTAINER DYAGNOSIS / MEASUREMENT
The container inspection and the bottom condition determination is effectuated by qualified professionals. The sharp hooks and flush bends are to be removed if any. A moisture-absorbing pad or grinding is to be used in case of rusty bottom. The foam is used for concrete container.
The preparation of reconstruction project comprises:
The liner and coupling system scheme to settle the size, the position of apertures, cranes and pipelines regarding location and other conditions.
Material selection as to the liquid type.
Preparation works comprise: The elimination of all old apertures and installation of new hermetically sealed ones. The finishing of the bottom and walls, if needed.
The monolith seam connecting and the leakproofness of the product is achieved with the help of high frequency equipment. It is a guarantee of the hermetically sealed storage of the substance.
Depending on the container construction complicity and filling volume, different types of installation is possible. With the maximum filling, the fixation of the liner is effectuated with the auxiliary apertures in the cover. If the volume is less than 100%, the fixation with metal sheets at the distance 50cm from the cover is applied. The installation time depends on the fixation type.
THE LINER IS READY FOR USE
After laying the liner, the container is ready for filling. A temporary water filling and the equipment testing may be held to check the leakproofness upon customer's request.